ACL Staticide 8385DGYR2440

24" x 40' Dualmat, Dark Gray

Add to List

DualMat™ Static Dissipative Mat, Dark Gray, 24" x 40'

Dualmat™ is a 2-ply chemically cross-linked rubber material that is inherently dissipative on the top side and conductive on the bottom side. The material will not exudate, outgas, or lose its electrical properties. The soft textured surface offers comfortable protection against static discharge, parts slippage, and damage from UV lights. The durable material is resistant against solder, heat, and most common solvents.

Using no vinyl monomers or DOP, the Dualmat™ ensures conformity to personal and environmental safety standards. Fully compliant to REACH, Dualmat™ does not use candidates on the SvHC in its manufacture.

Features:
• Embossed finish reduces glare and prevents parts from slipping
• .080" (2mm) thickness allows mat to remain flat and prevents curled edges
• .05 second decay time
• Low out gassing and VOC are ideal for clean-rooms and other controlled environments
• UV additives provide color stability and prevent fading
• No vinyl monomers or DOP ensures conformity to personal and environmental safety standards
• Durable surface withstands high temperatures, solder, flux and harsh chemicals

Electrical Properties @ 12% Relative Humidity:
Resistance between two points (RTT) ANSI - ESD S4.1: 10 volts 2.1 x 10⁷ ohms | 100 volts 1.3 x 10⁷ ohms
Resistance between point-to-ground (RTG) ANSI - ESD S4.1: 10 volts 6.1x 10⁷ ohms | 100 volts 5.3 x 10⁷ ohms
Volume Resistivity: 4.6 x 10⁷ ohms-cm @ 12% RH (after 48 hours)
Decay Time: 100 volts to 500 volts per FTM 101C method 4046, ANSI/ESD S541 Appendix F, EN 100015/DIN 51953
Conformance: Meets or exceeds ASTM F-150, NFPA-99, ANSI/ESD STM 7.1, UL-779, EN 100015, DIN 51953, ANSI/ESD S20.20, and IEC-61340-5-1

Physical Properties:
Hardness: 85 ± 5 shore A per ASTM D-2240
Abrasion Resistance: Tabor abrasion test h-118 wheel (1000 cycles) 500 gram load under .5 grams loss
Temperature Resistance: Withstands soldering iron contact at 250°F (121°C) | Can withstand environmental temperatures up to 600°F (315°C)
Cleanability: Clean Dualmats™ with ACL’s 6001 Mat & Table Top cleaner
Installation: Cut with sharp blades or shears